ΠΡΟΪΟΝΤΑ
Λογαριασμός
0
Teltonika OTD140 LTE Cat 4 Outdoor Router
Teltonika OTD140 LTE Cat 4 Outdoor Router
Teltonika OTD140 LTE Cat 4 Outdoor Router
Teltonika OTD140 LTE Cat 4 Outdoor Router
manufacturer

Teltonika OTD140 LTE Cat 4 Outdoor Router

SKU: OTD140
Κωδικός: 4587
Παράδοση 4 έως 10 ημέρες
(0)Απόθεμα
Αρχική Τιμή

143,77€

Τιμή χωρίς ΦΠΑ : 115,94€

Εκτίμηση Κόστους Αποστολής & Σχετικών Φόρων

Εισάγετε τη διεύθυνση παράδοσης για την εκτίμηση του κόστους αποστολής.
Οι παραγγελίες αποστέλλονται αυθημερόν, βάσει διαθεσιμότητας και εφόσον έχουν καταχωρηθεί έως τις 12:00 μμ εργάσιμης ημέρας
ΔΙΑΘΕΣΙΜΟΤΗΤΑ
Για ερωτήσεις διαθεσιμότητας μεγάλης ποσότητας, καλέστε στο 210-2209582

  • Περιγραφή

    Teltonika OTD140 LTE Cat 4 Outdoor Router

    Ο δρομολογητής εξωτερικού χώρου OTD140 διαθέτει ειδικό και ανθεκτικό πλαστικό περίβλημα IP55 και ενσωματωμένο βραχίονα στήριξης, καθιστώντας αυτόν τον δρομολογητή 4G εξωτερικού χώρου εύκολο στην ανάπτυξη και ικανό να αντέχει σε εξωτερικές περιβαλλοντικές συνθήκες. Πέρα από αυτό, αυτός ο δρομολογητής εξωτερικού χώρου είναι εξοπλισμένος με συνδεσιμότητα LTE Cat 4, συμβατότητα με RMS για δυνατότητες απομακρυσμένης διαχείρισης και δύο θύρες PoE-in/out Ethernet.




  • Χαρακτηριστικά
    Χαρακτηριστικά
    MOBILE
    Mobile module4G (LTE) - LTE Cat 4 150 Mbps DL, 50 Mbps UL; 3G - 21 Mbps DL, 5.76 Mbps UL; 2G - 236.8 kbps DL, 236.8 kbps UL
    SIM switch2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
    StatusSignal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
    SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
    USSDSupports sending and reading Unstructured Supplementary Service Data messages
    Black/White listOperator black/white list
    Band managementBand lock, Used band status display
    APNAuto APN
    BridgeDirect connection (bridge) between mobile ISP and device on LAN
    PassthroughRouter assigns its mobile WAN IP address to another device on LAN
    ETHERNET
    LAN2 x ETH ports (can be configured as WAN), 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
    POE IN
    PoE ports1 x PoE In
    PoE standards802.3af/at
    POE OUT
    PoE ports1 x PoE Out
    PoE standards802.3af and 802.3at Alternative B
    PoE Max Power per Port (at PSE)24 W Max (power supply unit dependent)
    NETWORK
    RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
    Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
    VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
    Connection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
    FirewallPort forward, traffic rules, custom rules
    Firewall status pageView all your Firewall statistics, rules, and rule counters
    Ports managementView device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
    Network topologyVisual representation of your network, showing which devices are connected to which other devices
    DHCPStatic and dynamic IP allocation, DHCP Relay
    QoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
    DDNSSupported >25 service providers, others can be configured manually
    Network backupVRRP, Wired options, each of which can be used as an automatic Failover
    HotspotCaptive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and option to upload and download customised hotspot themes
    SSHFSPossibility to mount remote file system via SSH protocol
    SECURITY
    AuthenticationPre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
    FirewallPre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
    Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
    VLANPort and tag-based VLAN separation
    Mobile quota controlMobile data limit, customizable period, start time, warning limit, phone number
    WEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
    Access controlFlexible access control of SSH, Web interface, CLI and Telnet
    VPN
    OpenVPNMultiple clients and a server can run simultaneously, 27 encryption methods
    OpenVPN EncryptionDES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
    IPsecIKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
    GREGRE tunnel, GRE tunnel over IPsec support
    PPTP, L2TPClient/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
    StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
    DMVPNMethod of building scalable IPsec VPNs
    SSTPSSTP client instance support
    ZeroTierZeroTier VPN client support
    WireGuardWireGuard VPN client and server support
    TincTinc offers encryption, authentication and compression in it's tunnels. Client and server support
    OPC UA
    Supported modesClient, Server (planned)
    Supported connection typesTCP
    MODBUS
    Supported modesServer, Client
    Supported connection typesTCP
    Custom registersMODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality
    Supported data formats8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
    DATA TO SERVER
    ProtocolHTTP(S), MQTT, Azure MQTT
    Data to serverExtract parameters from multiple sources and different protocols, and send them all to a single server
    MODBUS MQTT GATEWAY
    Modbus MQTT GatewayAllows sending commands and receiving data from MODBUS Master through MQTT broker
    DNP3
    Supported modesStation, Outstation
    Supported connectionTCP
    DLMS
    DLMS SupportDLMS - standard protocol for utility meter data exchange
    MONITORING & MANAGEMENT
    WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
    FOTAFirmware update from server, automatic notification
    SSHSSH (v1, v2)
    SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET
    CallReboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer
    TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
    MQTTMQTT Broker, MQTT publisher
    SNMPSNMP (v1, v2, v3), SNMP Trap
    JSON-RPCManagement API over HTTP/HTTPS
    MODBUSMODBUS TCP status/control
    RMSTeltonika Remote Management System (RMS)
    IoT PLATFORMS
    Cloud of ThingsAllows monitoring of: Device data, Mobile data, Network info, Availability
    ThingWorxAllows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
    CumulocityAllows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
    Azure IoT HubCan send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type
    SYSTEM CHARACTERISTICS
    CPUMediatek, 580 MHz, MIPS 24KEc
    RAM128 MB
    FLASH storage16 MB
    FIRMWARE / CONFIGURATION
    WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup
    FOTAUpdate FW
    RMSUpdate FW/configuration for multiple devices at once
    Keep settingsUpdate FW without losing current configuration
    FIRMWARE CUSTOMIZATION
    Operating systemRutOS (OpenWrt based Linux OS)
    Supported languagesBusybox shell, Lua, C, C++, and Python, Java in Package manager
    Development toolsSDK package with build environment provided
    GPL customizationYou can now create your own custom firmware and web page application, with some examples to make the creation process easier; and brand our firmware by changing colours, logos, and so on to fit your or your clients’ needs
    INPUT / OUTPUT
    EventsEmail, RMS, SMS
    POWER
    ConnectorRJ45 Socket
    Input voltage range for PoE42.5–57.0 VDC, reverse polarity protection, voltage surge/transient protection
    Power consumptionIdle: < 2.5 W / Max: < 6 W / PoE Max < 21 W
    PHYSICAL INTERFACES
    Ethernet2 x RJ45 ports, 10/100 Mbps
    Status LEDs3 x Mobile connection type
    3 x Mobile connection strength
    4 x ETH status LEDs
    SIM2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V
    PowerRJ45, PoE In, 42.5 – 57.0 VDC
    Antennas2 x Internal antennas
    Antennas specifications1 x 698 - 960 / 1710 - 2690MHz, 50 Ω, VSWR <3.5, gain ​<3 dBi, omnidirectional
    1 x 698 - 960 / 1710 - 2690MHz, 50 Ω, VSWR <3, gain ​<4.5 dBi, omnidirectional​​​​
    ResetReboot/User default reset/Factory reset button
    PHYSICAL SPECIFICATION
    Casing materialPlastic (PC+ASA)
    Dimensions (W x H x D)110 x 49.30 x 235 mm
    Weight855 g
    Mounting optionsMounting Bracket (for vertical flat surface or pole mounting)
    OPERATING ENVIRONMENT
    Operating temperature-40 °C to 75 °C
    Operating humidity10% to 90% non-condensing
    Ingress Protection Rating<

  • Λήψεις

    Datasheet

    • Teltonika OTD140 LTE Cat 4 Outdoor Router

    Ο δρομολογητής εξωτερικού χώρου OTD140 διαθέτει ειδικό και ανθεκτικό πλαστικό περίβλημα IP55 και ενσωματωμένο βραχίονα στήριξης, καθιστώντας αυτόν τον δρομολογητή 4G εξωτερικού χώρου εύκολο στην ανάπτυξη και ικανό να αντέχει σε εξωτερικές περιβαλλοντικές συνθήκες. Πέρα από αυτό, αυτός ο δρομολογητής εξωτερικού χώρου είναι εξοπλισμένος με συνδεσιμότητα LTE Cat 4, συμβατότητα με RMS για δυνατότητες απομακρυσμένης διαχείρισης και δύο θύρες PoE-in/out Ethernet.




    Χαρακτηριστικά
    MOBILE
    Mobile module4G (LTE) - LTE Cat 4 150 Mbps DL, 50 Mbps UL; 3G - 21 Mbps DL, 5.76 Mbps UL; 2G - 236.8 kbps DL, 236.8 kbps UL
    SIM switch2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
    StatusSignal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
    SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
    USSDSupports sending and reading Unstructured Supplementary Service Data messages
    Black/White listOperator black/white list
    Band managementBand lock, Used band status display
    APNAuto APN
    BridgeDirect connection (bridge) between mobile ISP and device on LAN
    PassthroughRouter assigns its mobile WAN IP address to another device on LAN
    ETHERNET
    LAN2 x ETH ports (can be configured as WAN), 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
    POE IN
    PoE ports1 x PoE In
    PoE standards802.3af/at
    POE OUT
    PoE ports1 x PoE Out
    PoE standards802.3af and 802.3at Alternative B
    PoE Max Power per Port (at PSE)24 W Max (power supply unit dependent)
    NETWORK
    RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
    Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
    VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
    Connection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
    FirewallPort forward, traffic rules, custom rules
    Firewall status pageView all your Firewall statistics, rules, and rule counters
    Ports managementView device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
    Network topologyVisual representation of your network, showing which devices are connected to which other devices
    DHCPStatic and dynamic IP allocation, DHCP Relay
    QoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
    DDNSSupported >25 service providers, others can be configured manually
    Network backupVRRP, Wired options, each of which can be used as an automatic Failover
    HotspotCaptive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and option to upload and download customised hotspot themes
    SSHFSPossibility to mount remote file system via SSH protocol
    SECURITY
    AuthenticationPre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
    FirewallPre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
    Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
    VLANPort and tag-based VLAN separation
    Mobile quota controlMobile data limit, customizable period, start time, warning limit, phone number
    WEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
    Access controlFlexible access control of SSH, Web interface, CLI and Telnet
    VPN
    OpenVPNMultiple clients and a server can run simultaneously, 27 encryption methods
    OpenVPN EncryptionDES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
    IPsecIKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
    GREGRE tunnel, GRE tunnel over IPsec support
    PPTP, L2TPClient/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
    StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
    DMVPNMethod of building scalable IPsec VPNs
    SSTPSSTP client instance support
    ZeroTierZeroTier VPN client support
    WireGuardWireGuard VPN client and server support
    TincTinc offers encryption, authentication and compression in it's tunnels. Client and server support
    OPC UA
    Supported modesClient, Server (planned)
    Supported connection typesTCP
    MODBUS
    Supported modesServer, Client
    Supported connection typesTCP
    Custom registersMODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality
    Supported data formats8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
    DATA TO SERVER
    ProtocolHTTP(S), MQTT, Azure MQTT
    Data to serverExtract parameters from multiple sources and different protocols, and send them all to a single server
    MODBUS MQTT GATEWAY
    Modbus MQTT GatewayAllows sending commands and receiving data from MODBUS Master through MQTT broker
    DNP3
    Supported modesStation, Outstation
    Supported connectionTCP
    DLMS
    DLMS SupportDLMS - standard protocol for utility meter data exchange
    MONITORING & MANAGEMENT
    WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
    FOTAFirmware update from server, automatic notification
    SSHSSH (v1, v2)
    SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET
    CallReboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer
    TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
    MQTTMQTT Broker, MQTT publisher
    SNMPSNMP (v1, v2, v3), SNMP Trap
    JSON-RPCManagement API over HTTP/HTTPS
    MODBUSMODBUS TCP status/control
    RMSTeltonika Remote Management System (RMS)
    IoT PLATFORMS
    Cloud of ThingsAllows monitoring of: Device data, Mobile data, Network info, Availability
    ThingWorxAllows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
    CumulocityAllows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
    Azure IoT HubCan send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type
    SYSTEM CHARACTERISTICS
    CPUMediatek, 580 MHz, MIPS 24KEc
    RAM128 MB
    FLASH storage16 MB
    FIRMWARE / CONFIGURATION
    WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup
    FOTAUpdate FW
    RMSUpdate FW/configuration for multiple devices at once
    Keep settingsUpdate FW without losing current configuration
    FIRMWARE CUSTOMIZATION
    Operating systemRutOS (OpenWrt based Linux OS)
    Supported languagesBusybox shell, Lua, C, C++, and Python, Java in Package manager
    Development toolsSDK package with build environment provided
    GPL customizationYou can now create your own custom firmware and web page application, with some examples to make the creation process easier; and brand our firmware by changing colours, logos, and so on to fit your or your clients’ needs
    INPUT / OUTPUT
    EventsEmail, RMS, SMS
    POWER
    ConnectorRJ45 Socket
    Input voltage range for PoE42.5–57.0 VDC, reverse polarity protection, voltage surge/transient protection
    Power consumptionIdle: < 2.5 W / Max: < 6 W / PoE Max < 21 W
    PHYSICAL INTERFACES
    Ethernet2 x RJ45 ports, 10/100 Mbps
    Status LEDs3 x Mobile connection type
    3 x Mobile connection strength
    4 x ETH status LEDs
    SIM2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V
    PowerRJ45, PoE In, 42.5 – 57.0 VDC
    Antennas2 x Internal antennas
    Antennas specifications1 x 698 - 960 / 1710 - 2690MHz, 50 Ω, VSWR <3.5, gain ​<3 dBi, omnidirectional
    1 x 698 - 960 / 1710 - 2690MHz, 50 Ω, VSWR <3, gain ​<4.5 dBi, omnidirectional​​​​
    ResetReboot/User default reset/Factory reset button
    PHYSICAL SPECIFICATION
    Casing materialPlastic (PC+ASA)
    Dimensions (W x H x D)110 x 49.30 x 235 mm
    Weight855 g
    Mounting optionsMounting Bracket (for vertical flat surface or pole mounting)
    OPERATING ENVIRONMENT
    Operating temperature-40 °C to 75 °C
    Operating humidity10% to 90% non-condensing
    Ingress Protection Rating<

    Ο καταναλωτής έχει την δυνατότητα να επιλέξει με ποια συνεργαζόμενη εταιρεία courier επιθυμεί να λάβει την παραγγελία του.

    Η εταιρεία μας συνεργάζεται με τις ακόλουθες εταιρείες courier:

    • FIS courier
    • ACS courier
    • ELTA courier

    * Για τον υπολογισμό του βάρους μιας παραγγελίας προσμετράται το βάρος ή ο όγκος. Ο τελικός υπολογισμός βάρους γίνεται από τον αριθμό που υπερτερεί (βάρος ή ογκομετρικό βάρος αντίστοιχα)

    ** Ο χρόνος παράδοσης εξαρτάται από την συνεργαζόμενη εταιρεία courier καθώς και από τον τελικό προορισμό της παραγγελίας.

    • Για παραγγελίες εντός Αττικής εως 14:00 μ.μ. εκτιμώμενος χρόνος παράδοσης: επόμενη εργάσιμη ημέρα.
    • Για παραγγελίες προς χερσαίους ή νησιώτικούς προορισμούς: 2 εργάσιμες ημέρες.
    • Για παραγγελίες προς δυσπρόσιτες ή απομακρυσμένες περιοχές: 3 – 4 εργάσιμες ημέρες

    (Οι παραγγελίες δεν πραγματοποιούνται Σάββατα – Κυριακές και αργίες)

    TOP